Tar and Glue Remover
The Auto Finesse ObliTARate tar and glue remover is the easiest way to remove tar spots and glue residue from your vehicle
Auto Finesse ObliTARate is a solvent-based formula that quickly dissolves stubborn tar and glue residues and contamination on contact even before you touch your car. This minimises the possibility of marring and scratching paintwork, while extending the life of your detailing clay bar. Auto Finesse ObliTARate can dissolve even the most extreme contaminates, like traffic cone rash from auto-crossings, gaffer or duct tape from temporary camera mountings, undercoating overspray and residues from factory protective wax coatings. ObliTARate is safe to use on all modern painted and powder-coated surfaces, as well as glass, solvent-resistant hard plastics, bare metal and bright work trim. However, it's a very strong solvent product and may cause damage to fresh paint, SMART repairs, un-catalysed lacquers and some delicate vintage finishes. If using the product on these surfaces, proceed with caution and test on an inconspicuous area beforehand. If no hazing or swelling of the finish is present, and no paint gets transferred to your applicator or microfibre towel, you can use ObliTARate with confidence.
**Please note this now requires a large black trigger**
Firstly, you'll need to ensure that the surface you're treating is clean and free from loose dirt and contamination. Then, apply ObliTARate to the affected area and leave to dissolve any present tar and glue residue. Once applied, working in small sections at a time, wipe off using a microfibre cloth. Repeat if necessary.
Please note: ObliTARate is NOT sold with a trigger and should not be used on headlights. We also we do not advise putting cloths containing a solvent-based product into the washing machine.
Directions for use
We've put together a few simple steps to help you get the best out of Oblitarate 500ml highlighting what you should be doing to get the most out of Oblitarate 500ml when detailing your pride and joy.
- Ensure surface is clean and free from loose dirt and contaminates.
- Apply to affected area and leave to dissolve the contamination.
- Using a microfibre cloth wipe away excess.
- Do not let solution dry or bake on any surface.
- Repeat if necessary.